Home > Products > Chemical Sealant > Mirror Sealant

Mirror Sealant

Brand : CSJ

Product origin : Shunde,Foshan

Delivery time : 4-7 Days

Supply capacity : 3000 tons/Month

Special Sealant for Mirror (C-528)

5.jpg

Characteristics:

1. One component

2.Neutral Curing

3. Non-discoloring and non-corrosive to metal, non-pollution and non-shifting of plasticizer

4. Excellent adhesion to mirror, metal and plastic etc

5. Excellent resistance to low and high temperature, little performance changes between -20 ℃~150 ℃

6. Excellent resistance to weather and ultraviolet radiation

7. Odorless

 4.jpg

Application:

Mirror glass in hotels and houses, coating glass, display cabinet, The identification plate 

 

Limitations:

1. Cannot be used as structural sealant.

2. Not compatible with materials with grease or exudation.

3. The construction surface should be clean and dry.

4. Not applicable to the seal of the immersed, airtight, or comprising substrates like brass and lead, and oil-exudation surfaces.

5. Cannot be used on the substrate surface below 6℃ or above 40 ℃

 3.jpg

Curing Time:

Track-free Time is between 5 to 15 minutes at room temperature

Completely curing Time is between 48 hours to 96 hours at room temperature.

 

Notices:

1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened

2. Pre-test is necessary to ensure the excellent adhesive property.

3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary

4. Keep away from children before curing.

5. Avoid contaminating food, medicine or cosmetics.

 

Color available:

Black

 

Packaging

Cartridge: 300 ml   24 cartridges/ctn

Gross weight: 470 g     Net weight: 410 g    

 

Storage and transportation:

12 months stored in a dry and ventilated place below 27 ℃ in original packaging.

Non-dangerous, can be transported by train, automobile, ship.

 

★ Testing Standard: GB/T 14683-2003

 

No

Item

The standard

Test result

1

Appearance

Have no grain, no agglomerations, no skinning, no bubble.

Pass the standard

2

Density (g/cm3)

±0.1

1.43

3

Droop degree

(mm)

Uprightness

≤3

0

Level

No distortion

No distortion

4

Skinning time (h)

≤3

0.17

5

Elastic recovery ratio (%)

≥80

95

6

Extrusion ability (ml/min)

≥80

121

7

Tensile modulus

(Mpa)

23℃

≤ 0.6

0.824

8

Cold-hot adhesive

No damage

No damage

9

Under water adhesive

No damage

No damage

10

UV radiation

No damage

No damage

11

Definite Elongation

No damage

No damage

 


Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone :

  • *Message :
    Message